Spraybase® Electrospinning Starter Kit
Spraybase® 20kV Power Supply Controller which has a single voltage output range of 0 V to 20 kV (positive) Multi Turn Control for accurate Voltage Setting and a Large Clear Display.
Spraybase® Syringe Pump is software controlled to drive the fluid with an infusion rate of 0.75 µl/hr to a maximum 2100 ml/hr (maximum syringe size is 60 cc)
1 x 18G emitter (Custom Single Emitter)
1 x Tube F
Spraybase® Electrospinning Platform (Base, Flat Plate Collector for collecting fibers, Z-axis Emitter Positioner, HV Emitter Holder)
Safety Cover interlocked for high voltage
Spraybase® Imaging System which is a camera capable of viewing and recording the Taylor cone.
Note this product requires a Laptop/PC which is not included. Spraybase® Syringe Pump includes a software licence - note licences are single use only and not transferable between devices.
AVAILABLE IN 30kV: A-0007-0001-01
|Model||Spraybase® Electrospinning Kit (A-001-001-01)|
|Description||Electrospinning instrument for fiber generation|
|High Voltage Power Supply|
|Voltage Range||0-20 kV|
|Voltage Resolution||10 V|
|Max Current||0.5 mA|
|Spraybase® Syringe Pump|
|Control||Software, Licence Supplied|
|Max Syringe Size||60 CC|
|Emitter to Collector Distance||250mm|
|Control||Z-axis Manual Manipulator|
|Min. Required Solution for Single Emitter Feeding||50 μl||Dimensions|
|L X W X H||500mm x 590mm x 500mm||Technical Requirements|
|Electrical||110-220 V,50-60 Hz|
|Computer/Laptop||No specific operating system|
If you're interested in a quote for this product, please contact us.